Pro Export Plus, spol. s r. o.
Moskevská 63
101 00 Praha 10
Czech Republic
E-mail: proexport@proexport.cz


Tel.: +420 246 002 224
        +420 272 770 648
        +420 272 765 059
Fax: +420 246 002 263

Clamping Centres

Clamping Centres

Pro Export Plus offers dead and live centres. Dead centres are supplied according to DIN 806 with or without sintered carbide tip. Skoda live centres are available in a wide assortment: 243324 with 60° point angle; 243328 extended, with 60° point angle; 243326 with interchangeable points; 243319 with top angles of 60° and 90° for clamping the hollow workpieces; 243325 for 60° or 90° apex angle; 243327 for NC lathes...

Live centres

Skoda live centres supplied by Pro Export Plus are in following executions: 243324 with 60° point angle; 243328 extended, with 60° point angle; 243326 with interchangeable points; 243319 with top angles of 60° and 90° for clamping the hollow workpieces; 243325 for 60° or 90° apex angle; 243327 for NC lathes.. The centres are intended for the clamping of workpieces on lathes. The version with the run – out tolerance of max . 0.0035 mm are, usually, employed in work on even grinding machines and, above all, in the grinding of heavy workpieces. The design features a small diameter of the center head which allows for an easy acces of the tool to workpiece. On centres with MORSE 2 – 6 taper the adjustability of the clearance in the front radial bearing is very advantageous. The MK 1 centre is of a different design and is intended for the clamping of very light workpieces. For the mentioned reason, the admissible load of the concerned centre is not specified. The live centre is provided with the shank with Morse taper according to DIN 228/ ISO296 without the clamping thread.

Dead centres

Pro Export Plus offers dead centres which are supplied according to DIN 806 either with or without sintered carbide tip. Sizes are MT 1 to MT 6 with 60° point angle.